MB 70 system from Aluprof

• MB-70 is a modern aluminium system intended for realizations of exterior architectural building elements requiring thermal and acoustic insulation, such as: various types of windows, doors, vestibules, display windows or spatial structures.
• The system profiles have a three-chamber structure.
• The structural depth of the window sections is equal to 70 mm (frames) and 79 mm (casement), and for doors: 70 mm and 70 mm respectively.
• The MB-70 system is characterized by a very low value of the overall heat-transfer coefficient U, thanks to application of the thermal breaks and gaskets.
• The value of heat transfer coefficient for constructions of the MB-70 system - depending on the applied profiles and accessories – ranges between 1.5 and 2.39 W/(m2 *K).
• In this system, the profiled "omega"-shaped thermal breaks are applied, of a width equal to 34 mm (windows) and 24 mm (doors), made from polyamide reinforced with fibreglass.
• The tightness is ensured thanks to using the special gaskets made of two-component EPDM synthetic rubber: solid and cellular, which guarantees its ageing resistance during the long-lasting exploitation, as well as very good thermal insulation. MB-70 is the first system in which this type of material was used for creating the central gasket.
• The system allows application of sets of glass panel of the thickness equal from 21 mm to 57 mm in window casements, and from 12 mm to 48 mm in fixed windows and door leafs.
• A wide choice of colours in the standard palette makes it possible to meet the needs of our most demanding customers.
• The MB-70 system forms the basis for solutions featuring enhanced thermal insulation performance, such as MB-70HI

MB 86 System from Aluprof

• The new MB-86 window and door series have been designed to offer outstanding insulation properties.
• Offered in three varieties ST, SI and AERO it is the first aluminum system to employ silica aerogel, the nanoporous material that has a very high proportion of free void volume compared to conventional solid materials.
• Its high pore volume, low solid content, and torturous path amorphous structure give rise to low values of thermal conductivity.
• Newly shaped, extra thick thermal breaks
• Multi component central gasket
• Glazing strips with additional sealing option
• Glazing up to 67,5 mm enabling all types of two chamber glazing, acoustic and security, anti burglary glazing
• Large, wire-free glass areas
• Appropriate for variety of hardware including concealed hinges
• Water draining available in both traditional and concealed options
• Highly energy efficient from 0,5 W/m2K
• Clean, sharp lines of narrow extruded aluminum framing
• Multitude of finish options

Superial System from Aliplast

• This series of high quality profiles with thermal break are applicable where the more severe standards for acoustic and thermal insulation are required.
• 3 chamber system.
• Built-in depth: Outerframe = 75 mm, Sash = 84 mm.
• Glazing possible from 14 to 61 mm
• Heat transfer coefficient: 2.68W/m²K 3.01 W/m²K
• Possibility to build doors opened to inside or outside.
• Glazing rebate = 22 mm.

Star system from Aliplast

• This series of high quality profiles with thermal break are applicable where the more severe standards for acoustic and thermal insulation are required.
• The profiles for this series are constructed from 2 aluminium extrusions separated from one another by polyamide strips. SUITABLE FOR PASSIVE BUILDING.
• 3 chamber system
• Built-in depth: Outer frame = 90 mm, Sash = 99 mm
• Glazing: Fixed frame = 17 – 73 mm, Sash = 22 – 82 mm
• Glazing rebate = 25 mm
• Heat transfer coefficient up to 0.81 W/m²K